View R635005_4126667.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

13 mm Dia. SIDE-ON COMPACT TYPE PHOTOMULTIPLIER TUBE SERIES
13 mm (1/2 Inch) Diameter, 9-stage, Side-on Type
The R6350 to R6358 series are compact side-on photomultiplier tubes with a 13 mm diameter and 50 mm height. Using different photocathode and window material combinations helped to produce a full product lineup to cover a wide spectral response range from the UV to the near infrared. This allows selecting the optimal tube to match your application and wavelength to be detected, the same as when selecting the popular 28 mm (1-1/8 inch) side-on tubes. The R6356-06 and R6357 do not use an entrance mesh (grill) which is usually installed just inside the light input window. This eliminates the light loss caused by the entrance mesh, even if the size of incident light beam is small.
Left: Fused silica window Center: UV window Right: Meshless type (R6356-06, R6357)
APPLICATIONS
GEmission Spectroscopy (ICP, Direct Reader) GEnvironmental Monitoring (NOx, SO2, etc.) GFluorescence Immunoassay GChemiluminescence Immunoassay GHygiene Monitor (Bio Luminescence) GX-ray Phototimer GFluorometer GMicroscope (Laser Scanning Microscope)
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2005 Hamamatsu Photonics K.K.
13 mm Dia. SIDE-ON COMPACT TYPE PHOTOMULTIPLIER TUBE SERIES
Side-On Compact Type Photomultiplier Tubes
Spectral Response Type No. Remarks Range (nm) R6350 R6351 R6352 R6353 R6354 R6355 For UV to visible range, 185 to 650 general purpose. Synthetic silica window type of R6350 High sensitivity variant of R6350 Low dark current bialkali photocathode For UV range 160 to 650 185 to 750 185 to 680 160 to 320
A B C D
Peak PhotoWave- cathode Window Outline length Material Material No. (nm) 340 340 420 400 230 530 400 450 530 Sb-Cs Sb-Cs BA LBA Cs-Te MA MA MA LMA U Q U U Q U U U U 1 2 1 1 2 1 1 1 1
Dynode Structure No. of Stages CC/9 CC/9 CC/9 CC/9 CC/9 CC/9 CC/9 CC/9 CC/9
Socket
Maximum F Cathode Sensitivity Ratings Luminous
G
Anode to Average Cathode Anode Min. Typ. Socket Assembly Voltage Current (V) (mA) (A/lm) (A/lm) E678-11U/E 1250 E678-11U/E 1250 E678-11U/E 1250 E678-11U/E 1250 E678-11U/E 1250 E678-11U/E 1250 E678-11U/E 1250 E678-11U/E 1250 E678-11U/E 1250 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 20 20 80 30 -- 80 200 350 140 40 40 120 70 -- 150 300 500 200
For UV to near IR range, 185 to 850 general purpose
High sensitivity
R6356-06 * variant of R6355 R6357 * R6358
Meshless type High sensitivity variant of R6356-06, Meshless type
185 to 900 185 to 900
Low dark current 185 to 830 multialkali photocathode
* Achieved the higher photocathode sensitivity by eliminating the mesh in front of the photocathode. It also features no output variation, disturbed by the mesh, when the incident light spot to the photocathode is small. NOTE: A Photocathode materials B Window materials BA: Bialkali Q: Fused silica LBA: Low dark current bialkali U: UV glass MA: Multialkali LMA: Low dark current multialkali D Dynode structure E See optional accessories CC: Circular-cage G Averaged over any interval of 30 seconds maximum. C Outline No. See Fig. 9
F The maximum operating ambient temperature range is -30 C to +50 C.
K Anode Characteristics L Cathode Sensitivity H J Anode to Anode Dark Anode Sensitivity Blue Current J Sens. Red/ Radiant Cathode Luminous Supply Gain (After 30 min.) Radiant Index White Typ. (CS 5-58) Ratio Typ. Voltage Min. Typ. Typ. Typ. Max. Typ. Typ. (V) (A/lm) (A/lm) (A/W) (nA) (nA) (mA/W)
Time Response Rise Electron Time Transit Time Typ. Typ. (ns) (ns) 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 15 15 15 15 15 15 15 15 15
Notes
Type No.
5 5 10 6.5 -- 6 10 13 7.5
-- -- -- -- -- 0.15 0.3 0.4 0.15
48 48 90 65
M
1000 1000 1000 1000 1000 1000 1000 1000 1000
50 50 100 100 -- 100 400
300 300 700 400 -- 600
3.6 x 105 3.6 x 105 5.2 x 105 3.7 x 105 1.8 x 105
M
7.5 x 106 7.5 x 106 5.8 x 106 5.7 x 106 3 x 106 4 x 106 6.7 x 106 4 x 106 3.5 x 106
0.5 0.5 1 0.1 0.5 1 1 2 0.1
5 5 10 2 5 10 10 10 1
Photon counting type: R6350 R6350P Dark Count 30 s-1 Max.
R6351 R6352
Photon counting type: R6353 R6353P Dark Count 30 s-1 Max.
62 45 77 105 70
R6354 R6355 R6356-06 * R6357 *
Photon counting type: R6358-10 R6358 Dark Count 300 s-1 Max.
1.8 x 105
2000 5.2 x 105
1000 2000 4.2 x 105 300 700 2.5 x 105
H Measured using red filter Toshiba R-68. L Anode characteristics are measured with the supply voltage and voltage distribution ratio specified by Note N. N Voltage distribution ratio and voltage.
J Measured at the peak wavelength. M: at 254 nm
K Refer to Note N.
Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 P Distribution Ratio 1 1 1 1 1 1 1 1 1 1 Supply Voltage: 1000 V, K: Cathode, Dy: Dynode, P: Anode
13 mm Dia. SIDE-ON COMPACT TYPE PHOTOMULTIPLIER TUBE SERIES
Figure 1: Typical Spectral Response of Cs-Te
TPMSB0128EA
Figure 2: Typical Spectral Response of BA, LBA, Sb-Cs
TPMSB0114EA
100 R6354
100 R6352
CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%)
CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%)
10
10 R6350 R6353
1
1 R6351
0.1
0.1
RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 500 0.01 100
RADIANT SENSITIVITY QUANTUM EFFICIENCY 200 300 400 500 600 700 800
WAVELENGTH (nm)
WAVELENGTH (nm)
Figure 3: Typical Spectral Response of MA, LMA
TPMSB0115EA
Figure 4: Typical Spectral Response of High Sensitivity MA
TPMSB0116EB
100
1000
CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%)
CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%)
R6358
R6357 100
10 R6355
10 R6356-06
1
1
0.1
0.1 RADIANT SENSITIVITY QUANTUM EFFICIENCY
RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 500 600 700 800 900 1000
0.01 100 200 300 400 500 600 700
800 900 1000
WAVELENGTH (nm)
WAVELENGTH (nm)
Figure 5: Typical Gain
108
TPMSB0208EA
Figure 6: Typical Time Response
TPMSB0118EA
100
107
106
R6350
R6355 R6357
TIME (ns)
GAIN
105
TRANSIT TIME 10
104
103
RISE TIME
102 300
400
500
600
800
1000
1500
1 500
1000 SUPPLY VOLTAGE (V)
1500
SUPPLY VOLTAGE (V)
Figure 7: Typical ENI Characteristics
10-12
TPMSB0119EA
Figure 8: Typical Anode Uniformity
INSULATOR BASE PIN
EQUIVALENT NOISE INPUT (W)
10-13
BULB
TOP VIEW
R6353
10-14
MESH R6357: MESHLESS TYPE
PHOTOCATHODE
R6350
10-15
ANODE RELATIVE OUTPUT (%)
R6357
10-16
100
50
10-17
100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm)
FWHM: 3.7 mm 0
2 LEFT
1
0
1
2 RIGHT
(mm)
TPMSC0036EA
13 mm Dia. SIDE-ON COMPACT TYPE PHOTOMULTIPLIER TUBE SERIES
Figure 9: Dimensional Outline and Basing Diagram (Unit: mm)
Outline No.1 13.5 0.8 PHOTOCATHODE 4 MIN. PHOTOCATHODE Outline No.2 13.5 0.8 4 MIN. DY5 DY4 5 32 72 13 MIN. 13 MIN. DY3 4 42 2 52 MAX. DY2 3 2 1 K 6 DY6 7 8 DY7 9 DY8 10 DY9 11 P
40 2
24.0 1.5
50 MAX.
24.0 1.5
DY1
DIRECTION OF LIGHT BOTTOM VIEW UV WINDOW FUSED SILICA WINDOW
TPMSA0034EB
Socket E678-11U
24 18 5.5
E678-11T (Sold Separately): For direct soldering to PC board
12.4 5.5
30
45
DIRECTION OF LIGHT
13
30
12.4
3
2.7
0.5 10.5 4
0.5 11
TACCA0181EB
11
3
TACCA0161EB
10.5
OPTIONAL ACCESSORIES
D-Type Socket Assembly
Grounded Electrode / Supply Voltage Polarity Anode / - Supply Voltage between Case and Pins (V) 1500 Maximum Ratings D Supply Voltage Voltage between Divider Power Supply Current Terminals (V) (mA) 1250 0.38
B A C
Type No.
Leakage Current in Signal Max. (A) 1 x 10-10
Total Voltage Divider Resistance (M) 3.3
Maximum Linear Output in DC Mode (A) 18 (at 1250 V)
Signal Output
E850-13E
DC/Pulse
E850-22: with SHV, BNC connector NOTE: A Measured with the maximum supply voltage. B Measured with a supply voltage of 1000 V. C The current at which the output linearity is kept within 5 %. D Operating temperature range is -20 C to +50 C. E Supplied with a separate mounting flange. See below for assembled dimensions.
Dimensional Outline and Circuit Diagram (Unit: mm) E850-13
PMT 0.5 MAX. SOCKET PIN No. 11 14.0 0.3 10 5 SIGNAL GND SIGNAL OUTPUT RG-174/U (BLACK) POWER SUPPLY GND AWG22 (BLACK)
Mounting Flange for E850-13
36.0 0.3 15.0 0.3 2.5 20
R1 1
P DY9 10
R10 R9
C3 C2 C1
2- 3.2 5.0 0.5
5 R1
35.0 0.5
12.6 0.5 12.4 0.5 HOUSING (INSULATOR) POTTING COMPOUND
DY8 DY7 DY6 DY5 DY4 DY3 DY2 DY1 K
9 R8 8 R7 7 R6 R5 5 R4 4 R3 3 R2 2 R1 1 -HV AWG22 (VIOLET)
TACCA0096EC
450 10
7.0 0.3
6
R1 to R10 : 330 k C1 to C3 : 10 nF
TACCA0097EB
13 mm Dia. SIDE-ON COMPACT TYPE PHOTOMULTIPLIER TUBE SERIES
LENS FOR 1/2 INCH DIAMETER SIDE-ON TYPE PHOTOMULTIPLIER TUBES
The optimized cylindrical lens which can be attached at the entrance window of 1/2 inch side-on photomultiplier tube. This lens helps the incident light reaches the photocathode efficiently. With this lens, the effective area widens by the factor of two in case of 1/2" PMT (7.5 mm width). The lens transmits above 300 nm light only.
Figure 10: Transmittance of Lens
100 90
TPMSB0191EA
LENS
TRANSMITTANCE (%)
80 70 60 50 40 30 20 10 0 200 300 400 500 600 700 800 900
LUMINOUS FLUX LENS
TPMSC0042EA
Lens Material: Acrylic resin
WAVELENGTH (nm)
Figure 11: Uniformity
100 ANODE SENSITIVITY WITH LENS WITHOUT LENS
Figure 12: Lens Effect (Ex.: R6358)
250
TPMSB0192EA
RELATIVE OUTPUT (%)
50
200 PARALLEL LIGHT WITH LENS 150 DIFFUSED LIGHT WITH LENS
0 3.75
0
50
100
6.5
0 X-AXIS (mm)
3.75
100 WITHOUT LENS 50
Y-AXIS (mm)
0
LENS
0 300
400
500
600
700
800
900
WAVELENGTH (nm)
6.5 MEASUREMENT CONDITIONS WAVELENGTH: 400 nm SUPPLY VOLTAGE: -1000 V A 1 mm diameter spot light (parallel light) is scanned at the center of the photocathode in X and Y directions.
TPMSC0041EA
Parallel light: Uniform and sufficiently large area, than the sensitive area size, of the parallel incident light (40 mm dia.) shall be given to the photomultiplier tube. Diffused light: Parallel light (40 mm dia.) is given to the photomultiplier tube through the diffuser, which locates 10 cm from the tube.
NOTE: The lens only (without photomultiplier tube) is not available.
WARNING ~High Voltage~
The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments.
WEB SITE http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TPMS1032E05 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it JUN. 2005. IP

▲Up To Search▲

Price & Availability of R635005

	To Download R635005 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .